Bones Bearings Testimonials
The many leaders
How do you feel about your Bones Bearings? Let us know!
Previous | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 | Next
Swiss are hands down the best bearings out there. Sure, they're a bit more expensive than other bearings, but once you've the chance to ride them, you'll understand why people who have other bearing sponsors ride Bones Swiss.
— Cairo Foster
The fastest bearings back in the day and 20 years later still the fastest.
— Alan “Ollie” Gelfand
Bones Bearings are the tool that makes skateboarding fast, fun and friendly. You can ask anyone in the industry which bearings are the fastest and if they are honest... they'll say Bones Swiss! That's something to be proud of, for sure.
— Steve Caballero
I'd rather ride old Bones Swiss than something else.
— Pat “P.A.T.” Channita
Bones Ceramics... they're the best. It's ridiculous how fast you can go on those things. They last forever too.
— Paul Machnau
Your bearings are the first ones I've ever purchased, (including those good Swiss ones) that came with those four spacers. Believe it or not, I've never used those till today. I just used to tighten my wheels down until the wheels didn't turn, and then back off a bit on the bolt. But those little spacers make all the difference, because now the force of the nut is going through the bearings themselves instead of forcing the inner bearing to cone slightly from the outer race where they are held against the urethane. I also took the rubber shield out just to have a look at how your bearings are made. It reminded me of when I first used to start riding, back on my old fiberglass Excaliber, when there were no detachable bearings, and I had to repack them every time, and they weren't sealed. But your removable cages allow them to be cleaned like those originals. And why are you the only ones I've seen yet that not only allow me to clean my bearings but also pack instructions on how to do it and encourage me to keep my bearings clean? Because the other companies are only interested in me burning up bearings and continuing to return to them to buy more! Well their scheme just fizzled with me because I'm only going to buy your bearings from now on. I have respect for any company that places the power of knowledge into the minds of their customers. So, well done.
— Mike Wofsey
Bones Swiss Ceramic Bearings are the best. I have had a set for only 5 months and they blew all of my previous bearings out of the water. I wouldn't trade them for anything.
— Brad Coons
I got a set of Bones Ceramics from Bones, while trying to clean them, I screwed up and removed all the balls! I sent them back to the factory and Bones reassembled them FREE OF CHARGE! My Bones skate great!
— Erik Lemmerman
I was using a pair of Popwar bearings and they screwed up after falling in the water once. My REDS have fallen in the water 4 times and they are fine, almost better than when I got them! Thanks for making good bearings.
— Matt
When I started skating I didn't know random bearings get destroyed after skating some months. I tried many brands but any kit of bearings surprised me, they all suck! Then I found Bones Bearings, Bones Swiss, known as the best of world. I get to got one kit... Dude, I still use them 2 years ago! Right now I have another Bones Bearings kit... Ahah. Keep making those bearings the best.
— Francisco Lima
Your bearings are the best. I have been a skater for a little over a year and every board I have has your REDS bearings on them. They roll so smooth. Keep up the good work yo.
— Ryan Howard
Holy cripes... your bearings are the hizzy to the shizzy. I went to the skate shop and I could've either gotten Flip HKD 5'z or REDS... and I got the REDS!!!: ) What a great decision. I didn't break them in yet but holy gosh they're fast. Thanks Bones for the best bearings.
— Raph Catalan
At my skatepark, you're not skating unless you ride Bones Swiss.
— Ender
I just got back into skating a few months ago and I'm really impressed with Bones Swiss bearings. Back in high school, I skated a lot with bearings that were average, non-lubricated and not that speedy. These bearings have changed the way I view my next board. I am currently building another board at the moment and initially I thought to buy the lower end bearings to save money, but Bones Swiss are the way to go! Thanks and peace.
— Ash Evans
After reading about these bearings and the work that has gone into making them the best on the market, I'm going to go out and buy some!
— Scott
